HÜPPE Price Catalogue 2024 / 2025

263 4. SCREWS Screws are fasteners made of stainless wire (steel) suitable for cold tapping. Characteristic : Inox A2 (Stainless steel) 304 CU Quality 5. SEALS They are plastic materials used for preventing leakage in cabins and xing the windows to the panel. Tensile Force : 1517 N/cm 2 (min) Expert : %190 (min) Degree of Hardness : 50 - 80 (Shore -A) 6. PLASTIC PARTS They are plastic-based materials that provide movement, friction, closing, joining and xing in cabinets. Frictional materials are based on POM and its derivatives and stationary materials are based on ABS. 7. SILICONE It is a neutral polymer suitable for multi-purpose use inside and outside. The silicones used in Hüppe are anti-bacterial. Breaking Force : DIN 53504 min 6.0 kg/cm 2 Elasticity : DIN 53504 280 - 350 Hardness (Shore-A) : 25 ± 1 Density : 1.00 ± 0.02 gr/cm 3 Expansion Rate : max. 25% Temperature Resistance : -40°C ila +180°C Scab Binding Time : Avg. 15 min. CONTENT Thickness Melting Point Water Absorption Tension Tearing Point Bending Hardness Tensile Strength Hardness Breakage Degree SIZE g/cm 3 g/10 min mg N/mm 2 % % 3-5N/mm 2 N/mm 2 N/mm 2 N/mm 2 CONTROL METHOD DIN 53479 DIN 53735 DIN 53495 DIN 53455 ASTM D 638 DIN 53425 DIN 53457 DIN 53456 DIN 53453 8. HINGES / METAL PARTS Hinges or metal parts are generally made of Zamak 5 - Z 410 (ZnAl4Cu1) material. They full l the requirements of EN 12844:1998 regarding the content of the material and EN 12540:200 and DIN EN ISO 9227 regarding the corrosion resistance of metals. Installation and Technical Material Technical Information